Author Topic: 1970 Black Jade hood stripe color  (Read 3682 times)

1970 Black Jade hood stripe color
« on: January 17, 2022, 01:14:29 PM »
Hi all,

I’m new to SAAC and have had my 1970 GT350 since last March (0F02M482299).  A past owner had painted the black hood stripes a gloss black which I know is not correct for black jade cars. What I don’t know is if the black used for the stripes should be a matte or a flat black.  I keep seeing both being thrown out there. In my limited knowledge of paint I believe there is definitely a difference between the two. A matte has a slight gloss/sheen while flat has none.

Anyone know the definitive answer to this?

Also I’d like to make sure the stripes that were re-done by a previous owner used the correct template. Does anyone know the correct one?  I found 2 online and both had different measurements for the stripes.

Attached is a picture of my current glossy stripes.

Appreciate any information anyone can share! Thanks!
Eric

Special Ed

  • Hero Member
  • *****
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #1 on: January 17, 2022, 02:16:20 PM »
Just make sure u get the pattern that the front tip is about 1 1/2''

Wooahbundy

  • SAAC Member
  • Jr. Member
  • *
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #2 on: January 17, 2022, 03:47:54 PM »
I'm interested in what the correct answer is to your question. My '70 GT350 is also black jade and the stripes are also a gloss black. According to my records the car was repainted in 1978. In print I too see that the correct stripe finish should be a flat or matte black, but almost every picture I see of a black jade Shelby, the stripes are glossy. Any shared knowledge on this topic would be appreciated.

Dan
1970 Shelby GT350 #2346
2013 Boss 302 #3161
1971 Boss 351-Gone but not forgotten!

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #3 on: January 17, 2022, 04:14:43 PM »
I'm interested in what the correct answer is to your question. My '70 GT350 is also black jade and the stripes are also a gloss black. According to my records the car was repainted in 1978. In print I too see that the correct stripe finish should be a flat or matte black, but almost every picture I see of a black jade Shelby, the stripes are glossy. Any shared knowledge on this topic would be appreciated.

Dan
I don’t want to get into semantics debate but Flat black and Matt black are typically perceived as the same by the car community. It is meant to be non reflective so as to better contrast with the dark but glossy Black Jade.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

98SVT - was 06GT

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #4 on: January 17, 2022, 05:40:09 PM »
I rate black in 3 finishes - gloss - satin - flat. The satin color is non reflective but has a little sheen like that used on 65-66 dashes (I think Krylon calls it Semi-flat). Flat has zero sheen and is very hard to keep "flat" even the oil from your hands touching it will leave marks.
Was there some type of bulletin put out from when the VINs were changed and stripes applied?

https://www.amazon.com/Krylon-Spray-Paint-Black-Semi-Flat/dp/B0742N19Y8/ref=sr_1_1?gclid=CjwKCAiAxJSPBhAoEiwAeO_fP0kQvBgqeJrpBueCSjnoeAw_hi3vxaMsshxX8Y3_6wokE0i9Wk6kdhoCz-EQAvD_BwE&hvadid=177785295041&hvdev=c&hvlocphy=9031245&hvnetw=g&hvqmt=e&hvrand=4404253903754473333&hvtargid=kwd-13464246302&hydadcr=2079_9901513&keywords=krylon+semi+flat+black&qid=1642459069&sr=8-1

Back in the day I found that Rustoleum BBQ black had the right finish for under hood and the interior.

https://www.autozone.com/paint-and-body/specialty-paint/p/rust-oleum-hi-heat-bbq-and-stove-paint-12oz/631973_0_0?cmpid=LIA:US:EN:AD:NL:1000000:GEN:10574827360&gclid=CjwKCAiAxJSPBhAoEiwAeO_fPxpNB83pNkuLrF6HK2M_HeS8e2pgrzZn3LkeqjFZ9hkRaetwDIazShoC80wQAvD_BwE&gclsrc=aw.ds
Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang Track Toy, 1998 SVT Cobra, Wife's: 2004 Tbird
Member since 1975 - priceless

Re: 1970 Black Jade hood stripe color
« Reply #5 on: January 17, 2022, 05:59:01 PM »
Thanks for that information regarding flat and matte. I wasn’t aware that they are considered the same in the car community. I have some thinking to do.  I’m not a true flat black fan since it can be a little hard to maintain.  It is probably the reason, like Dan said, that all repainted black jades seem to have glossy stripes.  I have to admit the glossy stripe on the black jade looks great.  But I would like the exterior original looking.  Something for me to think about.

Thanks,
Eric

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #6 on: January 17, 2022, 06:50:50 PM »
Thanks for that information regarding flat and matte. I wasn’t aware that they are considered the same in the car community. I have some thinking to do.  I’m not a true flat black fan since it can be a little hard to maintain.  It is probably the reason, like Dan said, that all repainted black jades seem to have glossy stripes.  I have to admit the glossy stripe on the black jade looks great.  But I would like the exterior original looking.  Something for me to think about.

Thanks,
Eric
Eric not everyone but most typically as I said. I think that the main reason that the stripes get painted glossy is that the people doing it or having it done did not know any better. I know for a fact in many cases I am aware of because I have asked over the years. With no other direction it is intuitive to paint it glossy on a color that is not dark but I don't think a lot of thought typically went into the contrast difficulties of hood stripes on a 70 Black Jade repaint IMO.  Basically if it is a lot less then high gloss it would pass and would contrast better too. ;) 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Re: 1970 Black Jade hood stripe color
« Reply #7 on: January 17, 2022, 07:20:05 PM »
Thanks for the insight.  Gives me something to consider.  As of now I know I wouldn’t want to go to a true flat black.. but a lot less glossy I will consider.  Wish I could see an example out there painted correctly. If there is a ‘70 black jade owner out there with a correct flat black stripe I’d love to see a picture if you’d be willing to share.

Eric

shelbymann1970

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #8 on: January 18, 2022, 12:47:28 PM »
When I met Larry Lawrence a short time before he passed away I never thought to ask him what black was used on black jade cars. I asked him about masking but didn't about taping off the screens(he passed away before I could talk to him again as Ed asked me to ask him that). Funny in that my friend Mark Haas and I listened to him tell KK stories and about painting the B9 scoops and the problems he had with them. How he got hired and such.  I also wonder if the same paint used on 70 Boss 429 hood scoops was used on the black jade cars. Gary
« Last Edit: January 18, 2022, 12:55:58 PM by shelbymann1970 »
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)

98SVT - was 06GT

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #9 on: January 18, 2022, 06:27:38 PM »
I found this shot of an A/S car that shows the satin finish on the black. The true flat black has zero reflection.
Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang Track Toy, 1998 SVT Cobra, Wife's: 2004 Tbird
Member since 1975 - priceless

Re: 1970 Black Jade hood stripe color
« Reply #10 on: January 18, 2022, 10:23:28 PM »
Those are great old pictures.  Seems quite possible KK would use the same black for the 429s.

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: 1970 Black Jade hood stripe color
« Reply #11 on: January 19, 2022, 09:36:43 PM »
Those are great old pictures.  Seems quite possible KK would use the same black for the 429s.


Guess your referring to the 70 Boss 429's

What black and where?
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

shelbymann1970

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #12 on: January 20, 2022, 05:48:08 AM »
Those are great old pictures.  Seems quite possible KK would use the same black for the 429s.


Guess your referring to the 70 Boss 429's

What black and where?
I made a comment that I wondered when Larry painted the black jade hood stripes if he used the same color mix as the paint for the scoops on Boss 429s(1970 of course). But then again after going to lacquer early on for 1969 Boss 429 hood scoops were 70s painted in lacquer? My assumption is that the Shelby hood stipes were painted in enamel.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #13 on: January 20, 2022, 11:54:16 AM »
Those are great old pictures.  Seems quite possible KK would use the same black for the 429s.


Guess your referring to the 70 Boss 429's

What black and where?
I made a comment that I wondered when Larry painted the black jade hood stripes if he used the same color mix as the paint for the scoops on Boss 429s(1970 of course). But then again after going to lacquer early on for 1969 Boss 429 hood scoops were 70s painted in lacquer? My assumption is that the Shelby hood stipes were painted in enamel.
Given the front and back open bay doors I don't think Larry is spraying non catalyzed single stage enamel with its long set up time . No doubt a lot of dust drifting in the air through those doors that would land and get stuck in the stripes before the paint dried tack free. My money is on Lacquer paint for the stripes.   
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

shelbymann1970

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: 1970 Black Jade hood stripe color
« Reply #14 on: January 20, 2022, 03:05:02 PM »
Those are great old pictures.  Seems quite possible KK would use the same black for the 429s.


Guess your referring to the 70 Boss 429's

What black and where?
I made a comment that I wondered when Larry painted the black jade hood stripes if he used the same color mix as the paint for the scoops on Boss 429s(1970 of course). But then again after going to lacquer early on for 1969 Boss 429 hood scoops were 70s painted in lacquer? My assumption is that the Shelby hood stipes were painted in enamel.
Given the front and back open bay doors I don't think Larry is spraying non catalyzed single stage enamel with its long set up time . No doubt a lot of dust drifting in the air through those doors that would land and get stuck in the stripes before the paint dried tack free. My money is on Lacquer paint for the stripes.   
I know Larry had problems with the enamel on the painted scoops and the long drying time. That is why KK went with lacquer. As a youngster I was told by many painters  you could paint enamel over lacquer but NEVER  Lacquer over enamel in most cases.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)