Author Topic: 67 GT500 trunk. Spare, jack and wrench placement  (Read 12632 times)

sfm5s081

  • Sr. Member
  • ****
    • View Profile
67 GT500 trunk. Spare, jack and wrench placement
« on: April 05, 2018, 05:35:29 PM »
Just wondering if someone could post a pict of how the Spare, jack and lug wrench mount in the trunk.

Thanks

sfm5s081

  • Sr. Member
  • ****
    • View Profile
Re: 67 GT500 trunk. Spare, jack and wrench placement
« Reply #1 on: April 13, 2018, 12:43:07 AM »
anybody? Bueller?

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: 67 GT500 trunk. Spare, jack and wrench placement
« Reply #2 on: April 13, 2018, 01:06:47 AM »
Allot of members of the site are having difficulty posting any pictures to the site right now if you'll notice allot of the threads and comments about the difficulties

Picture is going to be difficult since they are under the wheel when mounted. Might want to start with the jacking instruction sticker illustration on the car
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

sfm5s081

  • Sr. Member
  • ****
    • View Profile
Re: 67 GT500 trunk. Spare, jack and wrench placement
« Reply #3 on: April 13, 2018, 12:53:03 PM »
Allot of members of the site are having difficulty posting any pictures to the site right now if you'll notice allot of the threads and comments about the difficulties

Picture is going to be difficult since they are under the wheel when mounted. Might want to start with the jacking instruction sticker illustration on the car

Sadly, I do not have the sticker

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: 67 GT500 trunk. Spare, jack and wrench placement
« Reply #4 on: April 13, 2018, 01:32:37 PM »
Sadly, I do not have the sticker

From an out take of a jacking instructions I had taken for another project

Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

Bossbill

  • SAAC Member
  • Sr. Member
  • *
  • In the middle of Puget Sound
    • View Profile
Re: 67 GT500 trunk. Spare, jack and wrench placement
« Reply #5 on: May 20, 2018, 04:36:35 PM »
In this post:
http://www.saacforum.com/index.php?topic=1062.0
there was a comment about what the judges would like to see in regard to jack and handles.

If the car is being judged is the jack and handle stowed under the tire and therefore mostly invisible?
Or do we pull the jack, handle and tire out of the way so the judges can see all of the details (like the jack sticker)?

I'm a bit away from showing the car, but ...
Bill

67 GT350 Actual Build 3/2/67  01375
70 B302   6/6/70  0T02G160xxx

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: 67 GT500 trunk. Spare, jack and wrench placement
« Reply #6 on: May 20, 2018, 05:05:25 PM »
In this post:
http://www.saacforum.com/index.php?topic=1062.0
there was a comment about what the judges would like to see in regard to jack and handles.

If the car is being judged is the jack and handle stowed under the tire and therefore mostly invisible?
Or do we pull the jack, handle and tire out of the way so the judges can see all of the details (like the jack sticker)?

I'm a bit away from showing the car, but ...
You should display it like it is shown on the correct jacking instruction sticker .You would be surprised at how much the judges can determine even with the jack,handle etc. stowed properly.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Bossbill

  • SAAC Member
  • Sr. Member
  • *
  • In the middle of Puget Sound
    • View Profile
Re: 67 GT500 trunk. Spare, jack and wrench placement
« Reply #7 on: May 20, 2018, 10:37:56 PM »
Thanks Bob.
Bill

67 GT350 Actual Build 3/2/67  01375
70 B302   6/6/70  0T02G160xxx