Text only | Text with Images

SAAC Forum

The Cars => 1968 Shelby GT350/500/500KR => Topic started by: hurlbird on January 11, 2022, 01:32:58 PM

Title: tube nut size?
Post by: hurlbird on January 11, 2022, 01:32:58 PM
need a few for my door pullstrap ends. Not sure how they are sized, what to ask for. Thoughts? thanks
Title: Re: tube nut size?
Post by: 98SVT - was 06GT on January 11, 2022, 05:23:07 PM
Do you mean Rivnuts? https://www.rivetnutusa.com/catalogs/?gclid=Cj0KCQiA8vSOBhCkARIsAGdp6RSbsLoHBzhkaOLlnuMCo0KwPfY__EtWa5IoFIbChc7_FI-LGdhYw4UaAkm3EALw_wcB

Length is pretty standard. You can get them in American or Metric. Some cheap prices on fleabay for the tool and an assortment of nuts.
Title: Re: tube nut size?
Post by: hurlbird on January 11, 2022, 06:01:03 PM
thank you no. These are the little ones that Ford uses for the trim, emblems etc that allow you to push the piece in place no nut.
Title: Re: tube nut size?
Post by: davez on January 11, 2022, 09:28:03 PM
Like this?
Title: Re: tube nut size?
Post by: hurlbird on January 12, 2022, 09:48:12 AM
Great... Thank you!
Text only | Text with Images